Sunday, January 3, 2010

Lenntek Sonix Headphones

REGULATORY FRAMEWORK FOR UTILITIES Gas

LA NORMATIVA UNI CIG


Il Comitato Italiano Gas (CIG) è un Ente Federato all’UNI e fra i suoi compiti istituzionali, c’è quello di redigere le norme tecniche per il settore dei gas combustibili.

I progetti elaborati in ambito CIG al termine delle procedure d’inchiesta pubblica ed approvazione, vengono pubblicati come norme UNI.

Gli impianti a gas ad uso domestico ed usi similari come visto, sono regolamentati, per gli aspetti di sicurezza, dalle predette norme UNI-CIG; che vengono recepite generalmente con decreti ministeriali ai sensi e nell’ambito della legge 1083/71 ed in tale veste pubblicate nella Gazzetta Ufficiale della Repubblica Italiana.

Attualmente le norme UNI-CIG in vigore, sono essenzialmente norme di impiantistica, in quanto relativamente agli apparecchi, il Decreto del Presidente della Repubblica 15 Novembre 1996 n° 661 che recepisce la direttiva europea 90/396/CEE (GAD) concernente proprio gli apparecchi a gas, ha fatto si che le norme nazionali relative fossero sostituite dalle norme comunitarie, (norme EN) pubblicate dal Comitato Europeo di Normazione (CEN) .

Gli apparecchi di utilizzazione and their accessories, in accordance with Directive 90/396 EEC shall be made in conformity with EU laws and must also bear the CE marking impressed.



UNI 7129 "Plant for domestic gas supplied from the distribution network. Design, installation and maintenance "

The UNI 7129 is the most important national installation standard.

was published in 1972 and incorporated under the law of 1083 the first edition of the standard. In 1992 it was instead issued a new edition, now in force, implemented and published in the Official Gazette of the Italian Republic (GU) with the DM 21 April 1993.

In December 2001, UNI has published the consolidated text of the UNI 7129 "Plant for domestic gas supplied from the distribution network - Design, installation and maintenance."


The new edition of the standard is not a comprehensive review of the same but its reorganization and upgrading, other than as noted above, of course, was not yet implemented the Official Gazette of the Italian Republic, as part of the publication of ' UNI and approval by the Ministry does not exist short processing time. Summary of contents



The standard applies to systems equipped with single units with heat input non maggiore di 35 kW.

La UNI 7129 si articola sostanzialmente in tre principali filoni di trattazione:

gli impianti interni
la ventilazione dei locali
l’evacuazione dei prodotti della combustione.
Il capitolo degli impianti interni comprende i materiali ammessi all’uso per le tubazioni, per gli accessori, le modalità di installazione delle tubazioni (in vista, sottotraccia o interrate e negli attraversamenti), nonché le procedure per effettuare la prova di tenuta al termine del lavoro.

Nello stesso capitolo vengono specificate anche le modalità di installazione degli apparecchi e per la messa in servizio degli stessi nonché le prescrizioni per la manutenzione dell’impianto.

Chapter of the ventilation of the premises where the equipment is installed, lists the requirements to be taken in order to allow the flow of combustion air. The chapter is divided into three main sections:

natural ventilation natural ventilation direct
indirect
evacuation of stale air direct
Natural ventilation can be achieved, in the simplest way, by practicing one or more openings in outside walls external openings shall be protected with suitable grids. The net area of \u200b\u200bthe holes should be 6 cm2 per kW of thermal power installed, with a minimum of 100 cm2, if the openings are given Above the minimum area required shall be increased by 50%.

addition to the above, the rule also provides for the possibility of directly using proper ventilation ducts, individual or collective, for the air supply.

indirect natural ventilation can be obtained instead from an adjacent room continuously ventilated in the manner described above.

The passage of air from the room adjacent to the air can be achieved by creating an opening in the door between the two premises or by increasing the gap between the door and the floor to allow air flow; sections are calculated in the same way above mentioned.

relating to the evacuation of stale air, for example if the hob does not have its own cover for the conveyance of the vapors outside, the law provides for the possibility of using an electric fan (aspirator). In this case, however, you must follow some additional requirements to ensure that the fan can create a vacuum on the premises where it is installed and so draw the combustion products of other gas appliances.

Chapter evacuation of combustion products is quite extensive and detailed, as this is extremely important for the safety and security people.

The rule in this respect the specific characteristics of the exhaust channels (connections between the equipment directly Evacuant fireplace or outside) the minimum slope, length, the maximum number of curves and so on.

Another chapter covers the general characteristics of chimneys and flues, chimneys for the accuracy of the service are considered a single unit, or a maximum of two installed in the same environment, and the chimneys are up to 6 equipment installed in spaces on different floors.
In the first edition of the standard (UNI 7129/72) was allowed that the flue could receive branched evacuations 8 +1 units.

Chapter evacuation of combustion products, the rule also includes the possibility of evacuation live outside the so-called "wall trap."

In cases where this is permitted, are prescribed the distances between the exit gas from the terminal and windows, eaves, balconies, pipes, etc. from the floor.

More specifically, the rule is different distances depending on the heat output of appliances and other technical characteristics of these (natural draft or forced).

Finally, the text of the rule is accompanied by four appendices: the first concerns the calculation of the diameters of pipes of internal systems and the second covers the installation diagrams of cooking appliances for the different methods of evacuation of combustion products, the third internal dimensions of certain types of individual chimneys and the fourth is devoted to bibliographic citations.

Other general rules relevant

UNI 10738 "gas-fired plant fuel for domestic use existing prior to the date of March 13, 1990 - Guidelines for the verification of the functional"

This provision, enacted in seguto of Presidential Decree 218 / 98 which introduced the obligation to amend, by 31.12.1998, existing installations the entry into force della Legge 46/90 (ossia quelli installati antecedentemente alla data del 13 marzo1990), ai requisiti prescritti nell’art. 2 dello stesso decreto, indipendentemente dall’evoluzione normativa relativa alla buona tecnica successivamente al 1990, è attualmente in profonda revisione da parte di un Gruppo di lavoro al CIG per trasformarla in norma generale per la verifica degli impianti esistenti.

La norma UNI 10738, aveva lo scopo di fornire le linee guida per effettuare la verifica delle caratteristiche funzionali degli impianti a gas per uso domestico preesistenti alla data del 13 marzo 1990. Essa si applica agli impianti per uso domestico alimentati a gas combustibile [sia gas naturale (metano), sia gas di petrolio liquefatto (GPL), and manufactured gas], including thermal power units with single no more than 35 kW (30 000 kcal / h).

In particular, the standard defines the technical point of view, the procedures for carrying out five basic tests provided by the above-mentioned Presidential Decree 218/98, which is the verification of ventilation, ventilation of the premises, the efficiency of systems of evacuating the products of combustion, the tightness of the internal supply of fuel gas and the existence and functionality of the flame monitoring equipment.

E 'also required that the audit findings should be reported in a separate document, the so-called card verification log as shown in Appendix F, to be drawn up in duplicate, one for the client and one for the registrant.

E 'was also issued an' errata ', to correct an error in Appendix F of the standard.



UNI 7140 "Gas appliances for domestic use. Non-metallic flexible pipes for connection "

The standard defines the technical characteristics and test methods of various types of non-metallic flexible tubing to be used for the connection points of the gas supply with the use of household appliances, to pressure not greater than 0.1 bar.

The hoses are suitable for use in the standard for the supply of gaseous fuels 1st, 2nd and 3rd family, their length can not be greater than 1.5 meters, can not be used in recessed fixtures, shall bear marking certifies that the marking and the expiration date.



UNI 9891 "hoses, stainless steel continuous wall for the connection of gas appliances for household and similar"

The standard specifies the construction requirements, dimensional requirements and test methods of hoses, stainless steel continuous wall. It applies to hoses used as the connection of appliances Household and similar, with a net heat input not exceeding 35 kW, fueled by manufactured gas, natural gas, liquefied petroleum gas pressure not greater than 0.1 bar.
Maximum permissible length of 2 meters.



UNI 7131 "LPG for domestic use is not fed by the distribution network. Design, installation, operation and maintenance "

The UNI 7131 establishing the criteria for the design, installation, operation and maintenance of LPG for household and similar non-powered, network deployment, including the ' installation and replacement of LPG cylinders used at the users served. Such plants can essere alimentati o da un bidone di GPL singolo, o da più bidoni di GPL fra loro collegati, o da un deposito di GPL per uso domestico.

La norma si applica:

all'installazione o al rifacimento di impianti interni o di parte di essi (Nota 1);
all'installazione di apparecchi utilizzatori di portata termica nominale Q n non maggiore di 35 kW (Nota 2);
alla ventilazione dei locali in cui gli apparecchi utilizzatori sono installati;
all’evacuazione dei prodotti della combustione provenienti dagli apparecchi utilizzatori;
alla prima installazione e alla sostituzione di bidoni di GPL singoli;
alla prima installazione e alla sostituzione di bidoni di GPL fra loro collegati aventi capacità total not exceeding 70 kg;
groups adjusting for bins interconnected.

------------------------------------------------ --------------------------------

a part of a facility between the valve generally outgoing mail from a deposit for domestic use and the starting point inside the plant is treated in the UNI 9860, UNI 8827 and UNI 9036.
2 For the installation of appliances with heat input Q n greater than 35 kW, and for ventilation of the premises and the evacuation of combustion products related to such equipment, the rule refers to the specific rules apply.

0 comments:

Post a Comment